Root Watering System - Alwasail Products

Root Watering System

Root Watering System

The Alwasail Root Watering System ensures transplantation survivability, stability in high winds, and fast, healthy growth, especially for trees with deep and broad roots.

APPLICATION

For young plants and trees to thrive, they must receive adequate irrigation and a steady exchange of oxygen across all levels of the root zone. This encourages roots to grow deep and remain safely below ground, allowing plants to become strong and fully es­tablished.

The Alwasail Root Watering System allows vital water, air, and nutrients to bypass compacted soil and directly reach tree and shrub root systems. It supports ground installation to depths of either 36″ (91.4 cm) or 18″ (45.7 cm) for the RWS.

This system is designed for use with water dispensing devices, such as a bubbler head or an emitter. Users can customize the system to meet their specific irrigation requirements or opt for a version with a pre-installed bubbler.

HOW TO USE IT?

  • Position units evenly, spaced adjacent to the root zone and within the tree’s canopy.
  • Consider filling canisters with pea gravel for improved top-to-bottom water dispersion and added firmness against root compression.
  • For promoting long-term deep and broad roots, consider installing two Root Watering System perimeters on separate zones: operate the inner zone for the first couple of years and the outer zone in subsequent years.

 

 

 

 

 

 


WS-RWS-4B1701-18 
– Root Watering System with 0.25 GPM (0,9l/m) bubbler, 4″ (10,2cm) cap, 18″ (47 cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

WS-RWS-4B1701-36 – Root Watering System with 0.25 GPM (0,9l/m) bubbler, 4″ (10,2cm) cap, 36″ (90cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

WS-RWS-4B1702-18 – Root Watering System with 0.5 GPM (1,9 l/m) bubbler, 4″ (10,2 cm) cap, 18″ (45 cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

WS-RWS-4B1701-36 – Root Watering System with 0.5 GPM (1.9 l/m bubbler, 4″ (10,2 cm) cap, 36″ (90cm) open swing assembly with 1/2″ (15/21) M NPT inlet

WS-RWS-4B1701-18 – Root Watering System with 0.25 GPM (0,9 l/m) bubbler, 3″ (9cm) cap, 18″ (45cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

WS-RWS-4B1701-36 – Root Watering System with 0.25 GPM (0,9 l/m) bubbler, 3″ (9cm) cap, 36″ (90cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

WS-RWS-4B1702-18 – Root Watering System with 0.5 GPM (0,9 l/m) bubbler, 3″ (9cm) cap,  18″ (45cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

WS-RWS-4B1702-36 – Root Watering System with 0.5 GPM (1.9 l/m) bubbler, 3″ (9cm) cap, 36″ (90cm) open swing assembly with 1/2″ (15/21) M NPT inlet.

 

FEATURES

  • Pressure-compensating bubbler flow rates: 0.9 l/min or 1.9 l/min for precise watering.
  • Easy swing locking and wide cap design provide durable, vandal-proof protection for irrigation hardware and facilitate easy maintenance.
  • Built-in Alwasail Swing joint allows direct installation to a 1/2″ HDPE fitting.
  • Recommended pressure range: 1.0 to 4.8 bar (100 to 480 kPA).

BENEFITS

  • Deep and broad roots enhance transplantation survivability, ensure stability in high winds, and promote fast, healthy growth.
  • Subsurface irrigation effectively minimizes run-off and evaporation.
  • Installation at grade level helps reduce potential damage to hardscapes.

For more information about this product and its related items, you may check and browse the catalog below:

  1. Root Watering System Catalog

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to info@alwasail.com

Omar Al-Ghunaim Customer Service
966500561985
Call us to (+966) 920027777 from 8AM - 4PM (Riyadh) GMT + 3
Hello! How can I serve you?
×
How can we help you?