Irrigation Digital Tap Timer - Alwasail Products

Irrigation Digital Tap Timer

Irrigation Digital Tap Timer

The Alwasail Irrigation Digital Tap Timer is a reliable and efficient tool for managing your watering schedule, with features like rain delay, battery indicator, and easy programming. It’s designed for outdoor use, providing consistent performance in various weather condition

Category : New Products,Timers

Specification

Min/Max Operating Pressure
0.58bar ~ 8bar (7.25psi ~ 116psi)
Working Temperature
4.5°C ~ 45°C (40°F ~ 113°F)
Power
2x AA alkaline batteries
Waterproof
IP55
Rain Delay Time
1 day and up to 7 days

GUIDANCE NOTES

  1. For outdoor use only.
  2. Clean the filter regularly and replace if it is worn in order to extend the working life of timer.
  3. In winter, please remove batteries, drain and store it indoor to keep away from freezing.
  4. Do not install the timer with tools. Hand tighten ONLY. Use of tools may damage the timer.
  5. Do not subject the product to extreme force and shock.
  6. To prevent leakage, make sure that the water timer is tightly attached to the faucet and hose, add rubber washer and thread seal tape if necessary.

PRODUCT INSTALLATION

1. Installing the Batteries

a. Remove the battery cover on back of the timer.
b. Install 2 new AA (1.5V) alkaline batteries (not included).
c. Firmly reinstall the cover back into the timer.

Instructions
• Firmly restore the battery to ensure water resistance.
• Removed old batteries at the end of the watering season and disposed of them properly.
• Replace batteries when the low battery indicator appears on display.
• Please do not insert rechargeable batteries to avoid low voltage.
• The timer doesn’t have programmable memory, it needs to reset once power off.

2. Installing The Timer

a. Attach the timer to an outdoor hose faucet.
b. Please turn on the tap after programming the timer.

Instructions
• When programming the timer, please turn off the tap to avoid getting wet.
• Do not install the timer with tools. Hand tighten only.
• Keep away from freezing. Timer should be removed to avoid freezing damage.
• Filter can trap dirt particles, please clean filter regularly and replace if worn.

 



AUTOMATIC WATERING PROGRAM SETTING

• When the batteries installation finished, the Large screen will display (OFF).
• Please make sure the batteries are new and full power.

1. SET CLOCK
1.  Click button to select 12H/24H by turning right or left, press (OK) to next step.
2. Use the dial to set the current time by turning right or left. chang.
3. Press the (OK) button to switch time (Hours or Minutes).
4. Click button to next step and save changes.

2. SET START TIME

1. Use the dial to set START TIME by turning right or left.
2. Press the (OK) button to switch time (Hours or Minutes).
3. Click button to next step and save changes.

3. SET HOW LONG

1. Use the dial to set HOW LONG by turning right or left to select watering duration.
2. Press the (OK) button to switch time (Hours or Minutes).
3. Click button to next step and save changes.

 TIPS: The maximum duration is 5hrs and 59 mins

4. SET HOW OFTEN

1. Use the dial to set HOW OFTEN by turning right or left to set the watering frequency.
2. Click button to next step and save changes.

TIPS: The watering frequency range: 1-23 hrs and 1-7 days

5. AUTO

1. When in AUTO mode, the screen will display the current time and follow with the next watering time.
2. The timer will execute the watering plan automatically.

NOTE: The screen will be asleep in 30 seconds after no operation.

6. OFF MODE

1. When in AUTO mode, Click the button, the screen shows OFF.
2. All programs are saved and the timer stops working.

ADDITIONAL FEATURES

MANUAL WATERING

Please make sure the timer is in AUTO Run state.

1. Press the button for 3 seconds and turn the DIAL to select watering duration from 1 min to 59 mins.
2. Press (OK) button, it will start to water.
3. Press the button again, it will stop watering and switch back to Auto mode.

 

RAIN DELAY

Please make sure the timer is in AUTO Run state.

1. Hold and press (OK) button for 3 seconds to enter the RAIN DELAY mode.

2. Turn DIAL to set the delay time from 1 to 7 days.

3. Press (OK) button to save changes.

4. Press (OK) button for 3 seconds again, it will quit and switch back to Auto mode.


FAQ

Q1: The LCD screen does not display anything when the batteries are installed.
A1: Two batteries loaded are new 1.5V AA alkaline batteries, make sure the batteries are properly placed in the battery box.

Q2: The hose tap connection/outlet leaks.
A2 check if:

• The O-ring is connected correctly to the hose tap.
• The connection outlet or water pipe is broken.
• The faucet and water pipe have a different thread.
• If necessary, please use an appropriate adapter or PTFE tape.

Q3: Water does not come on at preset time.
A3 check if:

• Clock should be set to the correct time.
• Start time is set to desired the time.
• Rain Delay is on.
• OFF mode is on.
• The batteries are low.
• The faucet is turned off.

Bar, bars, battery, charge, status, three, usage icon - Download on Iconfinder   Battery Indicator
Faucet Icon - Free PNG & SVG 2133 - Noun Project   Watering
Delay
  Rain Delay (1 – 7 days)
Now
  Current Time
Next
  The Next Watering Time

 

SET CLOCK
Set current time
START TIME
Set the time of start watering
HOW LONG
Set watering duration (1 minute to 5 hour 59 minute)
HOW OFTEN
Set watering frequency (1 ~ 23 hours and 1 ~ 7 days)
AUTO
Start automatic watering based on your programs
OFF
Turn off all watering programs and shut off the valve

For more information about this product and its related items, you may check and browse the catalog below:

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to info@alwasail.com

Omar Al-Ghunaim Customer Service
966500561985
Call us to (+966) 920027777 from 8AM - 4PM (Riyadh) GMT + 3
Hello! How can I serve you?
×
How can we help you?